Bike theft is a serious problem in Patna and across Bihar. With over 5 lakh two-wheelers stolen every year in India, protecting your Pulsar, Activa, or Royal Enfield with a GPS tracker is one of the smartest investments you can make. The good news? Installing a GPS tracker on your bike in India is surprisingly easy — and you can do it yourself in under 45 minutes.
This step-by-step guide covers everything: tools needed, wiring instructions, hidden installation tips, SIM activation, and app setup — specifically tested on popular Indian bikes like Hero Splendor, Bajaj Pulsar, Honda Activa, TVS Apache, and Royal Enfield.
What You Need Before You Start
Your Alike GPS tracker package comes with everything needed for installation:
- ✅ GPS tracker unit (with pre-activated Airtel SIM already inserted)
- ✅ Wiring harness (Red, Black, Yellow wires)
- ✅ Engine cut-off relay (for remote engine immobiliser)
- ✅ Zip ties and mounting clips
- ✅ Step-by-step printed installation guide
You will also need from home: a screwdriver, wire stripper, electrical tape, and a multimeter (optional but helpful).
Step-by-Step GPS Tracker Installation on Bike
Step 1: Switch Off Your Bike & Locate the Battery
Turn off the ignition completely. For most Indian bikes like Hero Splendor or Bajaj Pulsar, the battery is located under the seat. Open the seat latch and locate the 12V battery. For Honda Activa and scooters, the battery is typically under the floorboard panel.
Pro Tip for Patna Riders
If you're installing in Bihar's extreme summer heat (45°C+), work in the shade or early morning. Electrical tape adhesive loosens in high heat — use zip ties for a secure, permanent hold.
Step 2: Connect the Main Power Wires
Your GPS tracker has 3 key wires:
- Red wire → Battery Positive (+12V)
- Black wire → Battery Negative (Ground)
- Yellow wire → Ignition (ACC) line
Use the blade connectors in the kit to splice into the existing wires — no cutting required. The Red wire must go to constant 12V power (always on), while the Yellow wire goes to the ignition ACC circuit so the tracker can detect when your bike's ignition is ON or OFF.
Step 3: Find the Ignition Wire (Yellow)
Use a multimeter or test light to find the ACC (ignition) wire in your handlebar wiring loom. This wire has 12V only when the ignition key is in the ON position. On most Indian bikes, this is the thick Red or Orange wire going to the ignition switch. Consult your bike's service manual or ask at a local auto-electrician in Patna if unsure.
Step 4: Install the Engine Cut-Off Relay (Anti-Theft)
The engine cut-off relay is the most powerful anti-theft feature. It connects in-line with your bike's fuel pump or ignition circuit:
- Locate the wire feeding your fuel pump (usually under the seat near the fuel tank).
- Cut this wire and connect the relay in-line (both ends of the cut wire go into the relay).
- Connect the relay control wires to the GPS tracker as marked in the guide.
Once installed, you can cut the engine remotely from the Protrack app if your bike is stolen.
Step 5: Insert the SIM Card & Hide the Device
The Airtel SIM comes pre-activated and pre-inserted in your Alike GPS tracker. No need to do anything. Now choose a hiding spot:
- Best hiding spots on a bike: Behind the instrument cluster, under the seat box, inside the headlamp nacelle, or inside the fairing on bikes like Pulsar NS or Apache.
- Ensure the tracker's antenna faces upward or outward — never metal-wrapped, as it blocks GPS signal.
- Use zip ties to secure the device firmly — Bihar's pothole-filled roads create significant vibration.
Step 6: Download the Protrack App & Add Your Device
- Download the Protrack app from Google Play Store or Apple App Store.
- Create a free account using your phone number.
- Tap "Add Device" and enter the IMEI number printed on the label on your GPS tracker.
- Name your vehicle (e.g., "My Pulsar 220") and save.
Step 7: Test the Installation
Start your bike and wait 2–3 minutes for the GPS to acquire satellite signal. Open the Protrack app — your bike should now appear on the live map with a green dot. Drive 100 metres and confirm the map updates in real time. If your bike is inside a garage in a dense area like Patna's Boring Road or Kankarbagh, move it outside for the initial GPS lock.
🔒 Alike GPS tracker — ₹3,999 Only
India's best-value GPS tracker with everything included. No hidden costs.
5 Common Mistakes to Avoid
- 1. Connecting to the wrong ignition wire — Always verify with a multimeter. Connecting to the wrong wire can cause tracker to show wrong status.
- 2. Covering the antenna — Never install the tracker inside a metal box or behind thick metal panels. GPS signals cannot penetrate metal.
- 3. Poor wire connections — Use the provided connectors properly. Loose connections cause intermittent power loss and offline tracker issues.
- 4. Installing in a visible location — The whole point is hidden installation. A visible tracker is easily removed by thieves.
- 5. Not testing before buttoning up — Always test the live tracking before reassembling the panels.
Installation Notes for Popular Bihar Bikes
| Bike Model | Best Hiding Spot | Difficulty |
|---|---|---|
| Hero Splendor Plus | Under seat, above battery | ⭐ Easy |
| Bajaj Pulsar 150/220 | Behind instrument cluster | ⭐⭐ Moderate |
| Honda Activa 6G | Under floorboard near battery | ⭐ Easy |
| Royal Enfield Classic/Meteor | Inside headlamp nacelle or tail unit | ⭐⭐⭐ Moderate |
| TVS Apache RTR 160/200 | Under tank, in belly pan area | ⭐⭐ Moderate |
Need Professional Installation in Patna?
If you're uncomfortable with DIY wiring, Alike GPS offers doorstep professional installation in Patna, Danapur, Phulwari Sharif, Khagaul, Bihta, Hajipur, and surrounding areas. Our trained technician will:
- Install the GPS tracker at your home or office
- Set up the hidden wiring and engine cut-off relay
- Configure the Protrack app on your phone
- Explain all features and set up geo-fence alerts
Call us at +91-7004533213 or WhatsApp +91-9570476549 to book a doorstep installation in Patna.
Frequently Asked Questions
Can I install a GPS tracker on a bike myself?
Yes. The Alike GPS tracker comes with a complete wiring kit and a step-by-step guide. Most bike owners in Patna complete the installation in 30–45 minutes without any professional help. The basic 3-wire connection (Red, Black, Yellow) is very straightforward.
Will the GPS tracker drain my bike battery?
No. The Alike GPS tracker draws less than 20mA in standby — far less than your bike's clock or alarm system. Even if your bike sits parked for 30 days, the tracker won't drain the battery.
Does GPS tracking work on bikes in rural Bihar?
Yes. Our tracker uses Airtel's 4G network, which has extensive coverage across Bihar including NH-19, NH-30, NH-31, and rural districts like Nalanda, Vaishali, Saran, and Muzaffarpur.
What if I can't find the ignition wire?
You can still use the tracker by connecting only Red and Black wires (to battery terminals). The Yellow ignition wire is optional — the tracker will still provide real-time GPS tracking, just without ignition status alerts.
Conclusion — Protect Your Bike Today
Installing a GPS tracker on your bike in India has never been easier. With the Alike GPS tracker at ₹3,999, you get a complete anti-theft solution with real-time tracking, remote engine cut-off, geo-fence alerts, and a 1-year Airtel SIM — all in one package delivered to your doorstep in Patna.
Whether you ride a Splendor in Danapur or a Royal Enfield through Boring Road, this 45-minute installation can save you from losing a vehicle worth ₹70,000 to ₹3,00,000. Order your GPS tracker today and protect your ride.